Support for Genkinno P1 & P1 SE

Get all the assistance you need with your Genkinno purchase.

Tutorial Videos

Genkinno P1 & P1 SE | Quick Start Guide
Genkinno P1 & P1 SE | Calibration Guide

Accessories for Genkinno P1

Regular price $49.99 USD
Sale price $49.99 USD Regular price
Regular price $19.99 USD
Sale price $19.99 USD Regular price
Regular price $29.99 USD
Sale price $29.99 USD Regular price
Regular price $69.99 USD
Sale price $69.99 USD Regular price
Regular price $99.00 USD
Sale price $99.00 USD Regular price
Regular price $14.99 USD
Sale price $14.99 USD Regular price
Frequently Asked Questions

Compatibility

Performance

Maintenance

After-sales

Compatibility

Yes, the Genkinno P1 works great for different pool types and adapts easily to different pool shapes and sizes. It also features an anti-collision strip design to protect your swimming pool walls.

If the dip does not exceed a 15-degree slope, the cleaner will be perfectly fine for such pools.

No, the cleaner is only designed to clean the bottom of the pool.

No, the cleaner is only designed to clean the bottom of the pool.

Yes, the charger is compatible with 220v outlets.

 Due to its battery capacity, the cleaner is only suitable for swimming pools with a size of up to 1614 sq. ft (150m²); otherwise, the cleaning ability will be affected.

Because the floating cable is 2 meters, in order to keep the cleaner running properly, we suggest a max depth of no greater than 2 meters (about 6.6 feet).

Performance

Yes, it does. It picks up leaves, dirt, sand, bugs, pet hair, and more.

The new 2023 model of the Genkinno P1 has improved cleaning capabilities that allow it to loosen algae for easier removal.

The cleaner is a complete plug-and-play device. However, if the device’s pathing becomes abnormal over time, you may need to recalibrate the compass. Please refer to our tutorial to see how this simple process is carried out.

Compass calibration is important to ensure efficient operation. If calibration is abnormal or incomplete, it may lead to aberrations or abnormalities in the cleaner’s path.

No. When the cleaner is turned on, it’s in auto mode by default, and will automatically begin cleaning the swimming pool. However, you can use the remote control for cleaning specific area

Genkinno P1 runs up to four hours of use in manual mode, and 2 hours in automatic mode, enough to clean up to 100 m² or 1076 ft²

Maintenance/ In-usage

 To clean the tank, simply remove it from the robotic pool cleaner and rinse it with clean water. There are videos and pictures available in our tutorial section for reference at https://genkinno.com/pages/tutorial-page

It takes approximately 3 hours to fully charge the unit.

The charging indicator is located on the wall charger. If the lights on the charger don’t turn on while charging, try unplugging and re-plugging the charger. If the problem still exists, contact us for further assistance.

After cleaning, the device will automatically park poolside. Gently pull on the floating cable to bring your cleaner to the surface of the pool to remove it.

It is highly recommended to clean the filter basket after each cleaning cycle.

After-sales

You can find replacement brushes on the accessories page at https://genkinno.com/collections/p1-accessories

Customer Service

+1 888-677-7740
Toll-free Hot Line, US only
Mon-Fri 9am-5pm EST
support@genkinno.com
Email support
24-hour response